This products is made up of cross linked polyolefin heat-shrinkable tubes,hote melt tubes and Stainless steel needle. It is specifically designed for the protection of fiber optical closure.
|Length of Tube||60mm||Outer Tube Diameter||3.5mm|
|Inner Tube Diameter||Inner 1.3mm|
|Steel Needle Diameter||1.2mm|
|After Recover Diameter||2.6mm||Working Temperature||-55 to 100°C (-67 to 212°F)|
|Tensile Strength||18MPa||Dielectric Constant||2.5|
|Elongation at Break||700%||Longitudinal Change||±5%|
|Dielectric Strength||25kV/mm||Volume resistance||1015Ω|
|Minimum Shrink Temperature||120°C (248°F)||Minimum Fully Recovery Temperature||100°C (212°F)|
Used to open the FTTH fiber terminal end.
In the box, cabinet, such as wiring into the box.
Off the back of the accidents such as fiber, maintenance.
LAN, wan, data and video transmission.
The construction of the fiber end user access and maintenance.
Optical fiber access of mobile base station.